Compare commits

...
Author SHA1 Message Date
FuelBoard Contributor 7dbb3d1a15 More info sheet: float the "Copied" capsule over the address row, not the map
The confirmation belongs to the address row, so hovering it over the map read as
belonging to the map. It now overlays the address row itself, horizontally centred
on the address line, as .overlay(alignment: .center) on the row with
allowsHitTesting(false) still keeping the row tappable through the capsule.

Verified: with the capsule up, the OCR box sits at y 1189-1231 inside the address
band (map bottom is 1075), the tint blob is centred at x 602.5 against a screen
centre of 603, the row's ink runs outside the capsule footprint are byte-identical
to the idle frame, and a real tap on the capsule's own footprint still copies.
2026-10-14 13:57:19 +01:00
FuelBoard Contributor 6e534ed5b7 More info sheet: float the "Copied" capsule and put the copy glyph on the address line
The address row is back to a single line: the copy glyph now sits on the address
line itself (trailing, plain glyph — the confirmation says it elsewhere), and the
always-reserved second line is gone.

The "Copied" confirmation is now a green-tinted capsule that floats over the
bottom of the map, directly above the address and horizontally centred. It is an
overlay with allowsHitTesting(false), so nothing reflows while it is up (verified:
the address row's ink, column for column, does not move) and the map's tap target
stays live underneath (verified: tapping where the capsule floats still opens
Apple Maps). A material base keeps it legible against map tiles, where a 14% wash
alone — the notice-capsule recipe — disappears. Timing is unchanged: 2s, then
fades, with the success haptic on copy.
2026-10-14 13:45:05 +01:00
FuelBoard Contributor 73db893f4f More info sheet: drop the hairline between the map and the address
The map already reads as its own block, so the row separator below it only
added clutter. Removed with .listRowSeparator(.hidden, edges: .bottom) on the map
row, leaving the Address/Distance and Distance/actions hairlines in place.
2026-10-14 13:16:19 +01:00
FuelBoard Contributor 7da09928ca More info sheet: one card for the map, address, distance and the two actions
The map, the address, the distance, any notices and the Directions/Report issue
row now share a single section, in that order, with the buttons as the last row.
The list's own row hairlines separate them (inset like Address/Distance), so no
hand-rolled Divider is added — that would double the line.

The map loses .listRowInsets(EdgeInsets()) so it sits inset inside the card with
its rounded corners, aligned with the hairlines and text rather than butting the
card edges.

Directions/Report issue keep .buttonStyle(.borderless); verified with real
simulated taps in the merged card that each fires alone.
2026-10-14 12:48:33 +01:00
+86 -65
View File
@@ -118,12 +118,92 @@ struct StationDetailView: View {
.accessibilityHint(String(localized: "Opens Apple Maps with driving directions",
comment: "Accessibility hint for the tappable map preview in the More info sheet"))
}
.listRowInsets(EdgeInsets())
}
// The two station actions live in their OWN section, so they
// render as a separate card BELOW the map instead of sharing the
// map's card and looking attached to the map tap target.
Section {
// No hairline between the map and the Address row: the map
// already reads as its own block, so the line only added
// clutter. The Address/Distance and Distance/actions lines
// stay.
.listRowSeparator(.hidden, edges: .bottom)
// The map, the address, the distance, any notices and the two
// station actions all share ONE card (the list's own row
// hairlines separate them), so no hand-rolled Divider here —
// adding one would double the line.
//
// The station name is NOT repeated: the sheet header already
// shows it.
//
// The whole row is a copy control: it puts JUST the postcode
// on the clipboard so it can be pasted into another
// navigation app. The copy glyph sits ON the address line,
// and the "Copied" confirmation is a capsule that floats OVER
// THIS ROW — it confirms the address, so it must not hover
// over the map. It is an overlay, so nothing moves while it is
// up, and `allowsHitTesting(false)` keeps the row tappable
// through the capsule.
Button {
copyPostcode()
} label: {
HStack(alignment: .firstTextBaseline, spacing: 8) {
Text("Address")
Spacer(minLength: 8)
Text(addressLine)
.multilineTextAlignment(.trailing)
.foregroundStyle(.secondary)
// Stays the plain copy glyph — the capsule carries
// the confirmation, so swapping this to a checkmark
// would say it twice.
Image(systemName: "doc.on.doc")
.font(.footnote.weight(.semibold))
.foregroundStyle(.secondary)
}
}
.buttonStyle(.plain)
.disabled(postcodeForCopying.isEmpty)
.accessibilityLabel(String(localized: "Address: \(addressLine)",
comment: "Accessibility label for the address row in the More info sheet"))
.accessibilityHint(postcodeForCopying.isEmpty
? ""
: String(localized: "Copies the postcode",
comment: "Accessibility hint for the address row in the More info sheet"))
// Horizontally centred over the address line itself.
.overlay(alignment: .center) {
if showingCopied {
HStack(spacing: 4) {
Image(systemName: "checkmark")
Text("Copied")
}
.font(.footnote.weight(.semibold))
.foregroundStyle(.green)
.padding(.horizontal, 10)
.padding(.vertical, 6)
// A material base keeps it legible where the tint
// alone (the notice-capsule recipe) washes out.
.background {
Capsule()
.fill(.regularMaterial)
.overlay(Capsule().fill(Color.green.opacity(0.22)))
}
.allowsHitTesting(false)
.accessibilityHidden(true)
.transition(.opacity)
}
}
if let location {
let distance = FuelStore.stationDistanceDisplay(
station: station, userLat: location.lat, userLng: location.lng
)
LabeledContent("Distance", value: distance.labelWithReturn(unit: distanceUnit))
.monospacedDigit()
}
ForEach(StationNotice.notices(for: station)) { notice in
Label(notice.title, systemImage: notice.symbolName)
.font(.subheadline.weight(.semibold))
.foregroundStyle(.orange)
.padding(.horizontal, 10)
.padding(.vertical, 6)
.background(Capsule().fill(Color.orange.opacity(0.14)))
}
// The two station actions are the LAST row of the card: half
// the width each, on one line, below Address and Distance.
HStack(spacing: 12) {
Button {
openDirections()
@@ -145,65 +225,6 @@ struct StationDetailView: View {
// button its own hit area — the half-row frame above.
.buttonStyle(.borderless)
}
Section {
// The station name is NOT repeated here: the sheet header
// (navigationTitle, inline) already shows it, and the address
// line below has any leading repeat of the name stripped, so
// a "Name" row only said it twice.
//
// The whole row is a copy control: it puts JUST the postcode
// on the clipboard so it can be pasted into another
// navigation app. The copy glyph and its "Copied"
// confirmation share a SECOND line that is always there, so
// the confirmation can never reflow the address above it.
Button {
copyPostcode()
} label: {
VStack(alignment: .leading, spacing: 6) {
HStack(alignment: .firstTextBaseline, spacing: 8) {
Text("Address")
Spacer(minLength: 8)
Text(addressLine)
.multilineTextAlignment(.trailing)
.foregroundStyle(.secondary)
}
HStack(spacing: 4) {
Spacer(minLength: 0)
if showingCopied {
Text("Copied")
.foregroundStyle(.green)
.transition(.opacity)
}
Image(systemName: showingCopied ? "checkmark" : "doc.on.doc")
.foregroundStyle(showingCopied ? Color.green : Color.secondary)
}
.font(.footnote.weight(.semibold))
}
}
.buttonStyle(.plain)
.disabled(postcodeForCopying.isEmpty)
.accessibilityLabel(String(localized: "Address: \(addressLine)",
comment: "Accessibility label for the address row in the More info sheet"))
.accessibilityHint(postcodeForCopying.isEmpty
? ""
: String(localized: "Copies the postcode",
comment: "Accessibility hint for the address row in the More info sheet"))
if let location {
let distance = FuelStore.stationDistanceDisplay(
station: station, userLat: location.lat, userLng: location.lng
)
LabeledContent("Distance", value: distance.labelWithReturn(unit: distanceUnit))
.monospacedDigit()
}
ForEach(StationNotice.notices(for: station)) { notice in
Label(notice.title, systemImage: notice.symbolName)
.font(.subheadline.weight(.semibold))
.foregroundStyle(.orange)
.padding(.horizontal, 10)
.padding(.vertical, 6)
.background(Capsule().fill(Color.orange.opacity(0.14)))
}
}
// Only shown while Fuel Savings backs it. `fuelSavings` is nil
// when the feature is off — `savingsLookup` returns nil when it
// is not configured — so the heading cannot be left dangling